Specifying Solutions – In-Ground & Drive Over

CHALLENGE:

Paths, plazas, driveways, and motor courts all want the same thing after dark: light that comes from the architecture itself. The moment a fixture is set into a walking or driving surface, it inherits a brutal job description: foot traffic, tire loads, standing water, impact, and heat.

SOLUTION:

Spec to the load, not just the look. Every fixture below is engineered to address this challenge: tempered or toughened glass, marine-grade metals, factory-sealed IP67/IP68 optics, and published load ratings you can drop straight into a spec. Here are our favorites from our line card.

B LIGHT | MEROPE 100

A drive-over in-ground projector whose optical compartment is factory-sealed. The fixture installs without ever opening it, so IP67 holds for the life of the luminaire.

3.5-t drive-over | IP67 | 12W · 26°/37°/51° | 2700K–4000K | CRI93 

PRODUCT LINK
SPEC SHEET

UNONOSEVETTE | RANGER 30

Continuous light with zero interruptions. An IP67 in-ground drive-over linear designed to butt end-to-end for unbroken runs, with an IP68 plug-and-play cabling system that makes long layouts fast and safe to install.  

3.5-t drive-over | IP67 | 12W · 26°/37°/51° | 2700K–4000K | CRI93 

PRODUCT LINK
SPEC SHEET

KKDC | MOMO BLOC

Crisp, continuous lines of light drawn across plazas and drive aisles. Toughened glass over stainless steel ground boxes, IK08/10 impact-tested, and rated for air-tired vehicles to drive over, up to a 30 kN static load.

30 kN static | IK08/10 | IP67 | 24V DC | 2300K–4100K + RGB | UL

PRODUCT LINK
SPEC SHEET

B LIGHT | INSERTO MINI DO

A line you can drive on. Compact linear marker with a flush diffuser that reads as one continuous, evenly lit stripe, rated for 4,000-lb drive-over loads and IK08 impact. Lengths run in 9.8″ increments from 10.6″ to 79.5″.

4,000-lb drive-over | IK08 | wet location | 2700/3000/4000K | CRI93 | UL2108

PRODUCT LINK
SPEC SHEET

VANILLA | LARGE INGROUND UPLIGHT

Shallow recess depth makes installation painless; the CCT menu runs from static white through dynamic white to RGBW. The drive-over version covers vehicular areas, all outdoor-rated, and is Intertek-listed. The easy yes for marking paths, walkways, and entrances at scale.

30 kN static | IK08/10 | IP67 | 24V DC | 2300K–4100K + RGB | UL

PRODUCT LINK
SPEC SHEET

HOLECTRON | INGROUND RADIUS

A line designed to bend. Fully potted in-ground luminaire that creates continuous, dot-free lines of light in straight runs, sweeping curves, or geometric patterns. Its marine-grade stainless-steel housing withstands drive-over loads up to 11,000 lbs, with IP67 protection and IK10 impact resistance. 

IP67 | 1800–6500K | CRI 90+ | static white, tunable white, RGB or RGBW | UL

PRODUCT LINK
SPEC SHEET

B LIGHT | BUTTON DO

Light paths, drawn in dots. A flush round marker under thick tempered glass that reads as one evenly lit disc. 100% glare-free, rated for 5,500-lb drive-over loads, and listed to UL 2108.Three sizes from 2.2″ to 7.6″.

5,500-lb drive-over | wet location| 2600K–3900K, RGB CRI93 + | UL 2108

PRODUCT LINK
SPEC SHEET

UNONOSEVETTE | CALIBER 80

Jewelry for the ground plane. A compact drive-over uplight machined in AISI316L marine-grade stainless or solid brass, sealed to IP68 so it doesn’t need a drainage system. Deep-recessed LEDs behind TIR optics deliver true glare control, and a Dim-to-Warm option takes the night down to firelight.

IP67 | 1800–6500K | CRI 90+ | static white, tunable white, RGB or RGBW | UL 

PRODUCT LINK
SPEC SHEET

Leave a Reply

Your email address will not be published. Required fields are marked *